1. Insert the wire tool (included in the kit) into the knob hole and depress the knob clip. Pull the knob off the door.

2. Push the cylinder out the back of the knob assembly to pop off the knob sleeve, and remove the cylinder.

3. Push the retainer ring tool against the retainer ring to pop it off the cylinder.

4. Insert the old key and turn it either to the left or right. Remove the plug by pushing the plug follower (supplied in the kit) through the cylinder. Make SURE to keep constant pressure between the plug and follower so the pins and springs don’t pop out.

5. Dump out the old pins, insert the new key, and use a tweezers or small needle-nose pliers to match the new colored pins to the color code on the special instruction sheet.

Schlage Rekeying kit:
$14.95 to $19.95